APD F-Series 80F3[X] V2 80A 8S ESC

The APD F-Series 80F3[X] V2 80A 8S ESC is an upgrade to the trusted ARM architecture. APD has included highly requested features such as configuration options, Bi-Directional DShot, and UART overvoltage protection. You can easily swap your existing 80F3[X] units for the 80F3[X]v2 ESCs. Additionally, their ESCs continue to offer features such as PWM-frequency dithering and Active Phase-Current Demagnetization, which enable smooth control with various powertrain combinations and peak power outputs of up to 4.7 kW.

• Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability. (V2)
• HBM (Hectic Boost Mode) ensures this will deliver maximum thrust, outperforming any other ESC
• Configuration of drive parameters, signal types and fault handling (V2)
• High-speed telemetry rates when operating DShot and ProShot (V2)
• Dynamic signal quality checks across supported input protocols (V2)
• Additional Telemetry types: PWM Telemetry and RPM Output (V2)
• Reversible operation support (full forwards to full reverse) (V2)
• Virtually no setup time, with simple motor reverse solder tab
• Digital commands over Proshot (including anti-turtle mode)
• Passthrough firmware updating and configuration (V2)
• Hardware protection for UART programming pins (V2)
• Bi-Directional DShot for RPM Filtering support (V2)
• Auto-detect ProShot or Dshot any frequency range
• 8-Layer PCB to ensure minimal track resistance
• Dshot300 to Dshot1200 capable (0.3-1.2Mbs/s)
• ProShot1000  capable (1Mbs/s)
• Up to 80 A Continuous* current
• Digital commands over Dshot
• Intelligent current sensing
• Onboard bootloader (V2)
• Plug and play firmware
• Auto Timing Advance
• Up to 750,000 eRPM
• True 10bit resolution
• 140 A Burst current
• Up to 8S capable
• Telemetry output
• Auto PWM-freq
• LED indication

• Additional Telemetry types: PWM Telemetry and RPM Output (V2)
• Dshot: Dshot300 to Dshot1200 capable (0.3-1.2Mbs/s)
• ProShot1000 capable: 1Mbs/s
• Continuous current: Up to 80 A 
• Battery capability: Up to 8S
• Firmware: Plug and play
• eRPM: 750,000 eRPM
• Resolution: True 10bit
• Burst current: 140A
• PWM-freq: Auto

IMPORTANT NOTES

• Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s airflow.

• Documentation and Datasheets

1x APD F-Series 80F3[X] V2 80A 8S ESC