ShopImmersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz Rx

Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz Rx

$69.99

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodized heats

About this Product

The Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz takes the innovative Ghost Hybrid concept to a new level, with the traditional long-range/low latency Ghost uplink, and a high-power Tramp video transmitter, packaged in a beautiful anodized heatsink. When flying between mountain peaks, launching several km from the pilot, and flying at >200km/h following aerial acrobats, there are not many systems that are trusted. ImmersionRC works with some of the best in the business, to provide reliability and performance which is second to none. The Ultimate Hybrid has been tested for months by some of the most respected pilots in FPV. The Ghost Ultimate Hybrid features intelligent and direct control of the video transmitter from the Ghost ecosystem. Use either the OLED menus on the Ghost Transmitter module, or the responsive OpenTx tools menu. Tx remains silent on power-up, shuts down immediately in an (unlikely) failsafe. Designed to mount seamlessly to any frame designed for Caddx Vista™ system, the Ultimate Hybrid mounts in seconds to a huge number of commercially available frames. For traditional frames without support for digital transmitters, a couple of M2 holes in the top plate is all that it takes to securely mount the Hybrid. As with all Ghost Hybrids, a choice of solder-free connector, or solder pads, to hook it up. Just 4 wires to connect to the flight controller.

VIDEO: Immersionrc Ghost Hybrid

Features

Standard mounting pattern for digital vTx’s (Caddx Vista™)
2s-6s HV operation, no need for a 5V supply
5.8GHz 10-1500mW Video Transmitter *
Thermally regulated, Factory calibrated
Only 10.3g with heatsink, 3.1g without
2.4GHz LoRa and FLRC Control
Onboard Ghost Uno Receiver
Long range AND low latency
All 48 Standard Channels
500Hz updates *

Specifications

Serial Formats: GHST, SBus, SBus-Fast (200k) , SRXL-2 (400k), SBus Inverted
Antenna Connectors: Standard U.FL with Locking Connectors
vTx Transmit Power: +25mW (EU), 1W (USA), 1.5W (Intl)
Firmware: Over-the-air (OTA) upgradable (Rx and VTx)
Sensitivity: -117dBm in Long Range mode
Dimensions: 31mm x 30mm x 7mm
vTx Control: Automatic, via Ghost
vDownlink RF Power: +13dBm
Power Supply: 2s-6s HV

IMPORTANT NOTES

Sbus is inverted by definition, SBus Inverted flips it over so that it doesn’t require inverters on F4 FCs
Available vTx channels and power may vary from region to region to comply with local regulations
GHST protocol is available in Betaflight 4.3, OpenTx, EdgeTx, PX4, and iNav.
1kHz ready for when OpenTx can supply quality data at this rate
EU units are limited to 25mW, US units limited to 1000mW

Includes

1x Immersion RC Ghost Ultimate Hybrid 5.8GHz VTX & 2.4GHz
1x qTee Antenna
1x Wire Harness
1x U.FL to SMA

FPV Regulatory Notice

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Lumenier cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.