Lumenier QAV-PRO Mini Whoop 3.5" Frame Kit

The Lumenier QAV-PRO Mini Whoop Is a performance 3.5" FPV quadcopter that is designed to combine the agility needed for outdoor flying with stable and protected capabilities for indoor flying. The Mini Whoop has been thought out as a platform that can carry an HD action camera while having enough power for fast maneuvers in a compact 3.5" size, featuring full propeller protection with premium carbon fiber and custom aluminum mounts. Being compact, powerful, and strong makes this frame the ultimate cinematic "One-Shot" drone.

Lumenier QAV-PRO Mini Whoop 3.5" FPV Drone - Khalifa International Stadium

• Premium Quasi-Isotropic Japanese Carbon Fiber (Matte Finish)
• Pusher Configuration for Longer Flight Time and More Power
• Dedicated RX and VTX antenna mounting spots
• Durable Prop Guard Brackets and Standoffs
• Designed for both HD and Analog Systems
• Wider footprint that ensures a stable flight
• Supports HD Action Camera Mounting
• Great for Professional Cinematic Use
• Prop Guarded frame

PROTECTION WITH PROP GUARDS

Flying so close to people or objects that you need a little more security? No problem! The QAV-PRO Mini Whoop provides prop guard protection so you don't need to worry about indoor or proximity flying.

Supports Full Size HD Action Cameras

Looking to add 4k buttery smooth video recording to your QAV-PRO Mini Whoop? No problem! the frame is designed to carry a GoPro-style camera with a dedicated camera mount on top. This allows a variety of cameras and 3D prints to securely hold the HD camera in place making sure you get the perfect shot!

DESIGNED FOR BOTH HD AND ANALOG SYSTEMS

The QAV-PRO Mini Whoop frame was designed from the ground up to be very versatile and allow many different configurations with the same design. This one airframe design fits 20x20 stacks, 25.5x25.5 toothpick AIO boards, and the DJI O3 Digital HD system. This frame has mounting points for an antenna, camera, receiver, transmitter, and more.

PUSHER STYLE FRAME

The Lumenier QAV-PRO Mini Whoop airframe design supports a pusher configuration. it was found to have 15-20% more flight time and even better throttle response. Many "pusher" style frames struggle to easily take off from the ground since their propellers are often resting on the surface, but with the QAV-PRO Mini Whoop... it's no problem since the entire prop is surrounded by carbon fiber. This gives you plenty of clearance to take off and land without any issues.

• Carbon Fiber Material: 2mm Quasi-Isotropic Japanese Carbon Fiber (Matte Finish)
• Model: QAV-PRO Mini Whoop 3.5"
• Dimensions: 25x20x5cm
• Weight: 155g

• Radio: RadioMaster TX16S MKII MAX PRO Multi-Protocol 2.4GHz Radio Transmitter w/ AG01 Gimbals - Lumenier Edition
• AIO FC/ESC: iFlight Beast H743 V2 AIO Board - H743 FC + 55A BLHeli_S ESC (BMI270) or BETAFPV Toothpick F722 AIO V1.1 - F722 FC + 35A BLHeli_S 2-6S ESC or SpeedyBee F745 AIO Board - F745 FC + 35A BLHeli_S 3-6S ESC
• Action Camera: Flywoo Naked GP11 Action Camera w/ Touchscreen + ND Filter Set
• Antenna: TBS Crossfire Immortal T Antenna V2
• Motors: Lumenier Zip V2 2305 Cinematic Motor
• Pro Receiver: TBS Crossfire Nano Rx Pro
• Goggles: DJI Goggles 2
• VTX: DJI O3 Air Unit

• 1x Lumenier QAV-PRO Mini Whoop Lower Prop Guard Plate (Set of 2)
• 1x Lumenier QAV-PRO Mini Whoop Upper Prop Guard Plate (Set of 2)
• 1x Lumenier QAV-PRO Injection Molded Universal GoPro Mount Base
• 1x Lumenier QAV-PRO Mini Whoop Camera Plate (Set of 2)
• 1x Lumenier QAV-PRO Mini Whoop Bottom Plate
• 1x Lumenier QAV-PRO Mini Whoop Motor Plate
• 1x Carbon HD Camera Plate Spacer
• 2x Lumenier 16x220mm LiPo Strap
• 4x M3x20mm Knurled Standoffs
• 2x M3x28mm Knurled Standoffs
• 1x SMA to U.FL Wire
• 1x Amass XT-60E-M
• 2x Rear Brackets
• 1x Hardware Kit
• 4x Landing Feet
• 5x Battery Pad
• 2x Zip Ties
• 1x Manual

Compatibility Chart