Holybro Kakute H743-Wing Flight Controller w/ Pin Header

Introducing the Holybro Kakute H743-Wing Flight Controller with Pin Header, a cutting-edge solution for your UAV needs. This flight controller is engineered by Holybro, a trusted name in drone technology, and offers exceptional performance and reliability. Its advanced features and built-in pin headers provide seamless integration and easy connectivity for your drone projects. Whether a hobbyist or a professional, the Holybro Kakute H743-Wing is designed to elevate your flying experience to new heights.

• Supports INAV (6.1.1 & later), ArduPilot (4.4 & later)
• Small and low-profile design fits into compact frames
• 3 On-board BEC outputs: 5V, 6V/8V, and 9V/12V
• High-precision, low-noise ICM-42688-P IMU
• STM32H743 MCU running at 480 MHz
• Plug-and-play GPS, CAN, I2C ports
• On-board voltage and current sensor
• Integrated BMP280 barometer
• 9V/12V ON/OFF Pit Switch
• Dual Camera Inputs switch
• CAN Bus Support

• Battery Voltage Sensor: 5K:25.5K (Scale 1800 in INAV, BATT_VOLT_MULT 18.18 in ArduPilot)
• 14x PWM outputs, 1x CAN, 5x ADC (Bat1/Curr1, Bat2/Curr2, and RSSI)
• 3x I2C (I2C1 and I2C2 for external devices, I2C4 for onboard sensors)
• 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Green)
• High-precision Current Sense (90A continuous, 220A peak)
• MCU: STM32H743, 480 MHz, 1MB RAM, 2MB Flash
• 7x UARTs (1,2,3,5,6,7,8) with built-in inversion
• 5V/9V(12V) for Camera/VTX power switch
• Blackbox: MicroSD card slot on SDMMC2
• USB/DFU Key Extender with USB Type-C
• Dual Camera Inputs switch
• Static power 160mA@5V
• IMU: ICM-42688P (SPI3)
• OSD: AT7456E (SPI2)
• Baro: BMP280 (I2C4)

• 1x Holybro Kakute H743-Wing Flight Controller w/ Pin Header
• 1x 15cm JST-SH 6Pin Cable (For USB-EXT Board)
• 1x Kakute H743-Wing Flight Controller
• 1x Electrolytic capacitor: 220uF 62V
• 2x XT60 60mm Power Cable
• 4x Sets 2.54 DuPont Pins
• 2x JST-GH 4Pin Cable
• 1x USB-EXT Board
• 1x Power Board
• 1x Top Board