ShopHolybro Pix32 V6 Modular Flight Controller

Holybro Pix32 V6 Modular Flight Controller

0 reviews

$209.99

The Holybro Pix32 V6 Modular Flight Controller is the latest update to the pix32 v5 flight controllers.

About this Product

The Holybro Pix32 V6 Modular Flight Controller is the latest update to the pix32 v5 flight controllers. This FC is a variant of the Pixhawk 6C and is comprised of a separate flight controller and carrier board which is connected by a 100-pin connector. The Pix32 V6 is designed for those pilots who need a high-power, flexible, and customizable flight control system.

Features

Newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
High-performance STM32H743 Processor with more computing power & RAM
New cost-effective design with a low-profile form factor
Sensor technology from Bosch® & InvenSense®
Arm® Cortex®-M7 core running up to 480 MHz
2MB flash memory
High power
1MB RAM

Specifications

Processors & Sensors
- FMU Processor: STM32H743
  - 32 Bit Arm® Cortex®-M7, 480MHz, 2MB memory, 1MB SRAM
- IO Processor: STM32F103
  - 32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
- On-board sensors
  - Accel/Gyro: ICM-42688-P
  - Accel/Gyro: BMI055
  - Mag: IST8310
  - Barometer: MS5611
Electrical data
- Voltage Ratings:
  - Max input voltage: 6V
  - USB Power Input: 4.75~5.25V
  - Servo Rail Input: 0~36V
- Current Ratings:
  - Telem1 Max output current limiter: 1.5A
  - All other port combined output current limiter: 1.5A
Mechanical data
- FC Module Connector Type: Panasonic-AXK5S-6S
- Dimensions: N/A
- Weight: N/A
Interfaces
- 16- PWM servo outputs (8 from IO, 8 from FMU)
- 3 general purpose serial ports
  - Telem1 - Full flow control, separate 1.5A current limit
  - Telem2 - Full flow control
  - Telem3
- 2 GPS ports
  - GPS1 - Full GPS port (GPS plus safety switch)
  - GPS2 - Basic GPS port
- 1 I2C port
  - Supports dedicated I2C calibration EEPROM located on sensor module
- 2 CAN Buses
- 2 Debug port
  - FMU Debug
  - I/O Debug
- Dedicated R/C input for Spektrum / DSM and S.BUS, CPPM, analog / PWM RSSI
- Dedicated S.BUS output
- 2 Power input ports (Analog)